5025-SA SPRING APPLIED AIR RELEASED BRAKE
Kobelts 5025-SA spring applied air released caliper disc brakes is built primarily of bronze and stainless steel. It is providing a solid, long-lasting braking solution for even the harshest, most corrosive conditions. This brake is well suited for parking or emergency braking duty on draw works, hoists, winches and more.
The 5025-SA spring brake is matched well to Kobelt’s 4″ (102 mm) and 7″ (178 mm) ventilated discs. With a minimum of 25″ (635 mm) diameter and a maximum disc diameter of 86″ (2.184 mm).
All Kobelt brakes feature a shoe design. These allow the brake pads to be easily and quickly changed while leaving the caliper in place.
All Kobelt caliper brakes can be fitted with either air applied, hydraulic applied, spring applied with air released or spring applied with hydraulic released actuators depending on the required service.
INSTALLATION
The foundation plate to support the brake caliper must be designed to withstand the maximum braking forces generated by the brake caliper. It must also be flat to ISO tolerance grade IT8 and square to the brake disc. A brake pedestal must be designed to allow the mounting bolts to be inserted from underneath. The rotating element should have bearings sufficient to carry the weight of the disc. It also resist the additional stress when the disc brake is applied. The spigot that centers the brake disc must not be designed in such a way that it impedes the thermal expansion of the disc.
Any guarding around the brakes must provide enough room to allow full extension of the brake
actuators plus full pad wear adjustment.
The piping to the brakes must be adequately sized to ensure rapid response times in all weather conditions. The piping must be selected to safely withstand the pressures required to operate the brakes.
For all Kobelt brakes are repair kits available.