- Air-Applied Brakes (12)
- Direct-Acting Brakes (5)
- Discs & Brake Accessories (7)
- Hydraulic-Applied Brakes (10)
- Manual & Wedge Brakes (4)
- Spring-Applied Brakes (19)
- Ultrajet (0)
The 2090 Series are a two station mechanical control system. One head is acting as a master control (model 2092) and the other as a remote control (model 2094). Both controls work in tandem, moving at the same time to synchronize controls across multiple stations.
The 2092 / 2094 control heads, manufactured entirely from bronze and stainless steel, are designed to be used for twin engine configurations. Each dual-function handle controls both the clutch and throttle of its respective engine. The 2092 also features a pull-out handle for over-riding the throttle control.
The 2092 maximum clutch stroke is 2 3/4″ (70 mm) and maximum throttle stroke is 2 1/4″ (57 mm).
These controls require a cable connection kit that typically uses 30 Series or 40 Series push pull cables. These can be produced in our own workshop.
NOTE: Two cables per engine are required for interconnecting the master
(model 2092) and remote control (model 2094). These cables can be ordered as 45808 series pull-pull cables. To be produced also in our workshop at every length.
The push-pull control cable between the main station 2092 and the clutch and throttle should be connected before the interconnecting pull-pull cable is installed.
|Bronze & Stainless Steel Construction|
|Multiple Station Configuration|
|Requires Additional Control Head|